The Natural Home Building Source
The Natural Home Building Source
The Natural Home Building Source

$69 septic filter with housing & handle kits are standard practice for all systems. Click here for main septic chapter with other system parts and pricing.

This $69 septic filter kit ships free and comes complete with filter, housing tee that fits Sch40 or SDR35 four inch pipe, and a handle extension kit. Every septic system should take the precaution to avoid sending particulates out into the leach field. Particulates combine over the years to form a sludge layer in the bottom of your leach field, called 'bio-mat'. Bio-mat clogs the soil in your leach field and drainage and it fails to function: drainage entirely stops. If you have a single compartment septic tank or are not able to install the septic filter inside of the second compartment of your tank, then add our $520 filter basin settling tank kit in-line after your septic tank. With a settling tank filter basin in-line after the septic tank, you are in-effect adding an extra settling compartment to the system. Our septic filter has 80 lineal feet of filtration area for up to 800 gallons per day treatment volume. A built-in gas deflector on bottom of filter provides secondary 1/2 inch filtration to prevent larger solids from entering the filter area inside. The patented flow reduces the trapping of solids in the filter by allowing solids to slough off and fall back into the tank for further digestion. 1/16 inch filtration slots, rather than mesh screens, provide much less surface area for solids to attach and promote the sloughing action. Filters feature a locking tab that securely locks the filter into its housing tee, preventing any chance of 'floating' by the filter and allowing solids to pass by. This design has served our clients well for over twenty years with nothing but positive feedback and great results. Very easy to clean when you inspect the septic tank and never needs replacing.

Naturally, check with your local building department for regional regulations regarding monitoring and disposal of septic waste. We recommend inspecting settling tanks yearly at first.
Lay a tarp atop the settling basin lid before backfilling with topsoil or mulch to make it much easier to excavate. PLEASE wear eye protection and gloves, at the very least... Pull the handle (included in kit) and hose the filter off, back into settling tank. Check level of sediment in the bottom of settling basin with a white rag wrapped around the end of a long disposable stick. You may be required to have a licensed septic system pumper remove and haul away the top layer of fats and bottom layer sediment for disposal at your local waste water treatment plant. If you dispose of septic waste on-site, bury underneath at least three feet of topsoil 'cap'. When mixing septic 'sludge' into an active compost pile with machinery, you should cap waste with at least a foot of soil to help avoid contamination. Septic compost piles must be restricted access, with adequate sub-surface drainage, perimeter fencing, and locked gates.

Septic settling filter basin tank shown cut-away with filter  housing installed

inlet hole & fittings are not pictured above

Septic tank or settling basin fittings and filter kit with all parts shown in this photo

* FREE Shipping via UPS Ground to 48 states - we do not ship to APO, US Mail Box, Hawaii, Alaska, Puerto Rico, US Virgin Isles, Mexico or Canada.
We keep units in stock for quick shipment by the next business day.

Septic Filter with Housing and Handle Kit is $69
Housing tee fits both SDR35 and thicker wall Sch40 4 inch diameter pipe. You never have to replace this septic filter. Just hose it off once a year when you inspect the tank to see if it needs pumped of solids. In normal usage, this septic tank filter schluffs debris for "self-cleaning" operation.

Add to Cart


Septic Basin Settling Tank Kit (no filter) is $520
Price includes the cost of shipping, which runs us nearly $200 these days.
Settling basin kit is 26" diameter by 42" tall and includes: tank with lid, SDR35 and Sch40 rubber grommets for 4 inch inlet and outlet pipes, neoprene lid gasket, and tamper resistant lid fasteners. Filter with housing and handle kit pictured is sold separately for $69 or With tank fittings kit for $160 (see below).

Add to Cart

12 inch Riser Extension for Settling Tank adds $105

Add to Cart

18 inch Riser Extension for Settling Tank adds $150

Add to Cart

Septic Tank or Settling Basin Fitting AND Filter Kit $160
Includes the $69 filter with housing and handle, PLUS 4" diameter sewer/drain SDR35 PVC fittings needed for typical tank installation: threaded cleanout, inlet and outlet beveled pipes, rubber seal grommets, inlet tee, three spare couplers, outlet tee housing which fits both 4" SCH40 and SDR35 pipe, and a hole saw kit. Filter housing is ABS plastic, so use a multi-plastic cement when attaching to PVC outlet pipe. Always prime all glue pipe joints first, before cementing.

Add to Cart

This 10 piece hole saw kit is included for free with our tank fitting and filter kit above for $160*. Every installation tends to be unique, so this free hole saw kit allows you to put the inlet, outlet, and inspection holes right where you need them. A nice touch that we continue to include for no extra charge with every tank fitting and filter kit. Trying to cut a round hole by hand or with a jigsaw can be a challenge, at best... risking ruin of the tank

Hole saw kit makes installation of your septic basin kit a breeze.

Click for main septic system chapter

Below is the specification sheet on our standard filter cartridge

Septic filter specification sheet
Septic sieve filter for sewage tank installation instructions

Filter housing is black ABS plastic so use 'multi-plastic' cement with white/green PVC pipe.
Always prime all pipe joints first, before applying your solvent weld cement.

Septic filter standard maintenance instructions

If you have a single compartment septic tank or are not able to install the septic filter inside of the second compartment of your tank, then add our 26 inch diameter by 42 inch tall filter basin tank in-line after septic tank.

Settling basin with filter and director-divertor valve

Best practice is settling tank 5 to 10 feet and leach field at least 20 feet away from house.

Septic filter basin with fittings kit and director valve

With moving water, especially septic tank water with some warmth and biological activity, you don't have to worry about freezing issues with proper installation. Key is a well-bedded tank in plenty of +/- 3/4 inch gravel. In cold climates, install at least one foot of gravel under and around the settling tank to prevent sodden, frozen soil (frost) from touching the tank sides. In extremely cold climates, the settling basin lid and surrounding area can be covered with tarp and 2 inch foamboard insulation and then buried at least one foot under finish grade. While possible to install a 12 inch or 18 inch extension to bury the settling basin deeper, it is not necessary or beneficial to bring the basin lid all the way to the surface. Even in the warmest climates, you should at least cover the lid with mulch to protect plastic from UV sunlight damage and make it easier to uncover when checking tank and filter yearly.

A WORD ABOUT PUMPING SEPTIC TANKS

Check both compartments yearly and pump before enough solids accumulate in first compartment to spill over into second compartment. Usually less than sixteen inches - consult manufacturer of your tank. Wrap a piece of white towel around the end of a long pole to check solids level in bottom of your septic tank. A healthy, properly sized septic tank might never need pumped, but not pumping when needed will result in grease and solids getting out to the leach field. Particulates, grease and solids create 'biomat' in the leach field percolation area, eventually causing it to fail and need replacement. Every three to five years is the normal cycle for pumping a septic tank (less often in warmer areas and/or lower usages). Should you live in an extremely cold climate, never have your tank pumped in the fall or winter - only pump in the spring. Septic tank water only avoids freezing through biological/bacterial activity (fecal matter decomposing). Refill your septic tank with water immediately after having it pumped !!! Without water on the inside, an empty septic tank is under extreme stress resisting the weight of backfill around it. This is especially true when soil is wet and when tanks are not properly bedded in plenty of gravel (selective, draining backfill). Stress is critical when sewage pumpers park too close to the tank, so always keep their truck at least 20 feet away. With enough stress, an empty concrete and fiberglass tank will crack, start leaking and eventually have to be replaced. Install an effluent septic filter and spray it off during yearly inspection of tank Sieve filters keep larger particles from getting out of the tank and compromising the leach field by clogging soil pores and causing failure (bio-mat). Septic filters are cheap insurance, installing easily in the second compartment of your septic tank.

PLEASE DON'T USE SEPTIC TANK ADDITIVES. Septic system additives are truly a waste of money and nearly all are harmful to the environment. Septic system additives supposedly break down fats and solids in the septic tank. In practice, this just allows smaller particulates to pass through the septic filter (hopefully you have one) where they re-unite in the leach field forming a dense bio-mat. We would never suggest flushing septic system additives into your septic tank. The FDA does not approve of any of them - none of these septic cleaning and/or maintenance products have been proven effective. At best, they will do no harm to your septic system or the environment, just waste your money. For me, the deciding factor is to ask yourself if you would like to see these additives find their way into your well water. Anything that can supposedly digest raw sewage should scare a person to have in their drinking water and thus their digestive system. A properly designed septic tank (two compartments and large enough) is going to operate just fine without additives. Avoid those "too good to be true" septic system additives on the market today.

main septic system design chapter with complete products & pricing

"Are we allowed to install this septic system on our property" is not a question we can answer for you. We have been providing much the same passive (non electric) septic system parts for over twenty years now, but we do not follow constantly changing city, county, and state building regulations. Unfortunately, with over 3000 counties in the United States, regulations changing from year-to-year, and interpretations of those rules varying from one inspector to another, it's never possible to say for certain 'what is allowed' locally. The county building department is your primary source of information on what is possible to install according to local 'code'. Rather than telephone them with questions, you should drive over in person and get a copy of their local Individual Sewage Disposal System ISDS Regs and also get a list of locally licensed soil engineers. The building department will confirm or revise your site plans once submitted for approval. Often the county inspector will assist you with site plans and design as a service provided for their permit filing fee. If not, they will refer you to a local engineering firm that can visit the property in person and design the system. We provide free consultation after the sale on installation procedures, system design improvements, and operational issues, but we do not provide any soil testing, on-site services, 'stamped' engineered plans, or 'advanced treatment' systems.




Privacy Statement: We will never release your name, contact information, or purchase history to anyone!
By using this website, you acknowledge reading, understanding & accepting Terms of Service Agreement
© 1998 - 2016 by Architerra Enterprises, Inc. d.b.a. TheNaturalHome.com. All rights are reserved, please.
Close

TheNaturalHome.com Terms of Service Agreement

Merchandise advertised online as Free Shipping only applies to the 48 contiguous United States of America. We do not ship Merchandise into Canada or Mexico, Alaska, Hawaii, Puerto Rico, Virgin Isles, APO/FPO, USPS mailboxes, freight forwarding services, or any off-shore island or international destination. We do not accept international credit cards for payment even when shipping within 48 contiguous United States. We do not accept personal checks or any money orders, other than US Postal Service money orders.

The use of this website, TheNaturalHome.com, is governed by the following Terms of Service Agreement ("TOSA"). This agreement shall constitute the whole agreement, in its entirety, between Architerra Enterprises, Inc. doing business as TheNaturalHome.com ("Merchant") and website visitor ("Client") and any purchaser ("Cardholder") of information, goods, or services ("Merchandise" or "Item" or "Shipment"). Merchant is referred to herein variously as: "TheNaturalHome.com", "Contractor", "Seller", "We", "Us" and "Our". Client hereby authorizes Merchant to perform work and supply information and any Merchandise or services as specified in writing by Merchant's invoice and automated email receipt from original purchase. Details within any email correspondence are secondary to the final invoice Merchandise description and online shopping cart receipt. By visiting TheNaturalHome.com website or by purchasing any service or Merchandise from Merchant, Client confirms and acknowledges reading, understanding, and accepting in-full this terms of service agreement. Client agrees without reservation to be legally bound by any and all terms and conditions contained herein. Signature and return of this TOSA form is not necessary for the terms and conditions herein to be valid and enforceable by law. Should Client use their own order form to make a purchase based upon price quote from Merchant, the terms and conditions contained herein shall be deemed primary, overruling any agreement incorporated within said Client purchase order or any implied contract. Print a copy of this TOSA for your records, but note current text posted online will be in effect should there be any dispute over terms of use. Should Client not understand or agree with TOSA, please email service@thenaturalhome.com for clarification before purchasing Merchandise or using Merchant website any further.

Privacy and Security

Complete Client privacy and total security are primary concerns. We promise to never release Client information to anyone for any reason. This privacy policy extends to referral and reference requests. Rest assured, We will never give anyone your name and telephone number so they can call during dinner to ask about a product purchased from TheNaturalHome.com. We promise you will never end up on a mailing list or get a sales call as a result of being one of Our Clients. Authorize.net secured server credit card processing service, that We have used for many years, has their own very strict privacy policy. TheNaturalHome.com is not given any access to credit card numbers during or after any shopping cart puchase made online with Authorize.net. We reserve the right to refuse service to any potential Client at Our sole discretion without explanation.

Pricing and Payment

With the exception of the Servel gas refrigerators, only Colorado residents are responsible for paying state sales tax of 2.9%. You may be responsible for paying sales tax directly to your state revenue agency, but We do not collect sales tax outside of Colorado. We do not accept international credit cards, money orders or checks for payment and We do not ship into Canada or Mexico, Puerto Rico, Alaska, Hawaii or any off-shore or international destination. Merchandise advertised Free Shipping only applies to the 48 contiguous United States of America. Special Orders shipped outside the 48 contiguous states (HI, AK, PR, VI, Guam and APO/FPOs) require bank wire transfer payment (EFT) no other option, sorry. Will-call pickup at freight dock and drop shipments to a third party (receiver not being the credit card holder) are only possible with cashier check, US Postal money order or bank wire transfer EFT payment in advance. Email service@thenaturalhome.com or fax 720-293-1705 with full shipping address and order details for a personal quote and payment invoice. Once invoice is completed, We can accept VISA and MasterCard orders online for fastest service or by phone at 800-563-9720, fax at 720-293-1705, email at service@thenaturalhome.com. Cashier's check, wire or US postal money order is recommended since they are treated as cash and orders ship immediately. Prices are subject to change without notice and do not include any applicable taxes (Colorado residents ONLY). On government and corporate accounts invoiced with payment due 'net thirty', the total amount must be received no later than thirty days after invoice date, not the Merchandise delivery date. Late payments are subject to a 2% monthly finance charge accrued from date of invoice. Package and individual Merchandise parts, components and product specifications are subject to change without notice. Special order items are bid on a case by case basis and quotes are generally good for thirty days unless otherwise notified. Price matching offers are only applicable before purchase is made, not after payment has been submitted for Merchandise. We offer only to price match advertised delivered cost for Kobe Range Hoods that ship via Fed-Ex Ground, not motor freight shipments on a pallet. We offer only to price match authorized Kobe dealers. Internet 'marketplaces' and auction sites commonly feature unscrupulous 'surplus Merchandise' retailers selling used, returns, and repackaged 'demo' units without proper disclosure. Unauthorized dealer surplus Merchandise is NOT covered under Kobe's manufacturer warranty and may well have hidden defects the surplus retailer will not cover. TheNaturalHome.com has long been an authorized dealer for Kobe Premium Series range hoods and We sell only brand new, factory-direct, fully warranted appliances.

Free 48 State Delivery

All shopping cart items are advertised as Free Shipping with no extra charge for delivery. Shipping and handling fees are factored into advertised total delivered price. Note shipping is only available to the 48 contiguous United States of America. We do not ship into Canada or Mexico, Puerto Rico, Alaska, Hawaii, Virgin Isles, APO/FPO mailboxes, or any off-shore or international destination. Inventory 'stock' items will ship within 2-3 business days from one of Our warehouses. Scheduled deliveries are not possible to arrange, but We automatically email tracking information after shipment, so you can anticipate delivery date. Motor freight deliveries do not include lift gate service to lower boxes onto the roadway, unless quoted with additional services. If need be, lift gate service to lower boxes onto roadway is available for an additional $65 to $100 fee. Street-side motor freight deliveries are not brought to your front door by the driver, like UPS and Fed-Ex package services. Client must meet motor freight truck deliveries on the street to unload and inspect shipments by hand before signing for Merchandise. Shipments must be accepted promptly within three days of arrival at local freight terminal or storage fees of +/- $50 per day, per pallet may apply. Any and all storage fees billed by trucking company are the sole responsibility of Client and must be reimbursed to Our company.

Fed-Ex and UPS Ground

Most shopping cart items ship via Fed-Ex or UPS Ground package delivery service. Package delivery services, unlike a motor freight carrier (see next paragraph), will allow us to file a hidden damage in transit claim for insurance reimbursement, but We are given less than a week to report it. Regardless of how well the exterior of container box appears, you must ALWAYS have the driver note ANY damage to shipping boxes in writing before signing. Then immediately, always take Merchandise completely out of its packaging and inspect ALL of the Merchandise, notifying us immediately should there be ANY hidden damage to Merchandise. Mechanical problems are covered under the manufacturer warranty, but hidden aesthetic damages (cosmetic dings, dents, broken Welds, significant scratches, or popped rivets) you discover than a week after delivery are not reimbursed or replaced by Fed-EX, manufacturer, Kobe, or TheNaturalHome.com. Not saying that you or your Merchant caused the damage to the unit before or during installation, but that possibility exists when Merchandise is not properly inspected upon arrival. Additionally, any appearance (non-mechanical) flaws found after installation will not be reimbursed or replaced by freight carrier, Fed-EX, manufacturer, Kobe, or TheNaturalHome.com. Merchandise that has been installed is not eligible for return or replacement by TheNaturalHome.com.

Motor Freight Shipping

Servel refrigerators, Sun-Mar composters, larger custom shade panels and larger Kobe range hoods ship via motor freight 'common carrier', as noted on the website and receipt. Scheduled deliveries are not possible to arrange, but We automatically email tracking information after shipment, so you can anticipate delivery date.Common carrier motor freight is shipped on a pallet with boxes covered in clear plastic stretch-wrap and is defined as street-side motor freight drop, which differs from small package services like UPS and Fed-Ex, in that the truck driver does not bring Merchandise into your building or onto the porch. Street-side motor freight drop is a basic delivery service, often in a full-size tractor trailer, where driver parks in street while you unload and inspect the Merchandise. Kobe range hoods, shade panels, and Sun-Mar composters are not shipped with lift-gate service. You must unload boxes from the tractor trailer by hand. If you require lift gate service to lower the Kobe range hood down onto the roadway, with what they call a mechanical 'Tommy lift', it is available for an additional $65 to $100 fee. Please arrange and pay for this optional service at time of order. Always check the number of pieces (boxes) present against the stated waybill shipping receipt tally. As with any motor freight shipment from any distributor, be certain to carefully examine ALL of the Merchandise, not just the outside of shipping box(es), before signing and accepting delivery. It is imperative with motor freight shipments that ALL products be unboxed and fully inspected PRIOR to accepting delivery. Regardless of what the delivery driver may say, you MUST inspect fully before signing and accepting the delivery. It is the freight truck driver's job to wait while you open and inspect shipment for damages. Simply looking at the outside of the box(es) is NOT adequate. Damaged Merchandise (that particular box, not all the boxes) must be refused delivery. Once someone signs for shipment, it confirms Merchandise was received free of ANY damage and removes liability from the transportation carrier. We can only assume that damage reported later and not refused delivery, was caused by the Client, and not the freight carrier. Any subsequent attempt to file a claim for loss or damage will NOT be accepted by the transportation carrier, distributor, or Our company, TheNaturalHome.com.

Returns and Cancellation

All returns, cancellations and/or exchanges must first be authorized in writing by TheNaturalHome.com at service@thenaturalhome.com. Client may not ship any Merchandise back until We supply return Merchandise authorization RMA number and address for the shipment. Orders often do not ship back to the same warehouse they shipped from originally. Contact us with invoice number and reason for return or exchange to obtain an RMA number and instructions. No returns, refunds or exchanges will be authorized more than 30 days after original purchase payment date. Design consultation services, DVDs, knit shade material, water tubes, greywater and septic system parts are not returnable for refund or exchange for any reason. Once payment has been made, custom panel orders are cut and enter the production system and cannot be cancelled after payment is made. No return on any remnants or discontinued items. Any authorized returns of Merchandise must be in the original carton, in new unused condition, and returned freight prepaid to Our designated warehouse. Merchandise originally shipped via motor freight carrier on a pallet, may not be returned via package delivery service such as UPS or Fed-Ex. Original actual shipping cost will be deducted from any refund due along with up to 15% restocking fee on the Merchandise. This restocking fee includes the 3% credit card processing on original purchase, which is not refunded by MasterCard or VISA. Please understand that items on Our website are advertised as "Free Shipping", which is to be understood as "there is no extra charge for delivery of PURCHASED Merchandise". UPS, USPS, Fed-Ex and motor freight carriers charge us a fee for delivery of Merchandise, which We must recoup on returns. Kobe, for instance, bills a flat-fee of $40 and $45 for business and residential Fed-Ex shipments and $162 and $186 for motor freight carrier drops. Sun-Mar and Servel units ship via motor freight carrier for anywhere from $120 to $300+ per unit, depending upon zip code and drop site designation. Kobe, Sun-Mar, Clivus Multrum, Quanics, Dometic and Servel returns are manufacturer-direct, drop ship items and may be subject to an additional manufacturer's restocking fee. Discontinued, clearance items are not eligible for return or exchange. If an item is returned without original packaging intact, or is damaged, found to be used, or otherwise not ready for resale, it may be refused and returned to sender at their expense, so always insure shipment.

Lost and Stolen Shipments

Tracking information is emailed following shipment on all orders so client can anticipate delivery date. Custom size shade panels are made-to-order and can take up to ten business days to produce and ship. All other 'stock items' normally ship within three business days. Should you not receive email shipping information, please send a request for tracking number in writing to: service@thenaturalhome.com. Note it can take up to 48 hours for a given tracking number to appear on transportation company website. During this time, shipment status may be listed as "order processed and ready for pickup". Traditionally, this just means the shipment has not yet reached transportation company terminal and scanned after being unloaded from truck that picked those package(s) up. Overdue shipments must be reported to merchant in writing within one week after anticipated delivery date. Cardholder hereby agrees that only two possibilities exist for a shipment that did not arrive as anticipated. Possibility #1) Transportation company shows shipment as still being in-transit. In this case, merchant will file a 'tracer' request on behalf of cardholder with transportation company and they will search for box(es) at all company freight terminals. Cardholder is required to fully cooperate by filling out any forms requested, returning any voice messages left, and replying to any email messages sent by transportation company or merchant. Your patience and consideration is required and greatly appreciated while transportation company attempts to find the shipment. Replacement or refund is authorized solely at merchant discretion. Cardholder is not permitted to cancel order. Cardholder is not permitted to dictate choice of replacement or refund. And cardholder is not permitted to dictate time frame for settlement and ultimate delivery date for merchandise. Possibility #2) Transportation company shows shipment as being delivered. In this case, merchant will file a 'lost shipment' claim on behalf of cardholder with transportation company. A lost shipment claim can take up to two weeks to resolve and unfortunately, the transportation company rarely, if ever, pays the insurance claim. Ideally, we only ship to cardholder, personally, at their residence or business 'home' credit card billing address, but regardless of designated drop site and receiving person and whether or not a signature was required at time of delivery, cardholder is solely responsible for merchandise security after drop is confirmed by transportation company. After transportation company confirms delivery to shipping address, no signature required, there will be no refund or replacement for lost or stolen merchandise for any reason. Cardholder must immediately file a theft report with their local police department for item stolen from property or designated drop site. Cardholder hereby agrees to relinquish any and all right to file a credit card chargeback sales reversal for merchandise lost in transit by transportation company or merchandise reported lost or stolen after delivery is confirmed by transportation company. Should cardholder file a chargeback in violation of this terms of service agreement, cardholder will be held responsible for reimbursement of any and all merchant services processing fees incurred as a result of the frivolous chargeback, which can be anywhere from $35 up to several hundred dollars.

Shade Panel Production

Our commercial grade knitted shadecloth carries a one year manufacturer's replacement warranty against defects in material and workmanship. You can expect at least 5 years of service when installed properly and well over ten years when used seasonally in a temperate climate. Client must inspect shade panels within one week of delivery in order to be able to report any damages. Rips, tears, and aesthetic damage you find more than one week after delivery are not reimbursed or replaced by the freight carrier or TheNaturalHome.com. Additionally, merchandise that has been installed is not eligible for return or replacement for damage claims. Fabric is knitted polyolefin, primarily high density polyethylene HDPE, specially treated for durability and UV resistance. Wind damage from loose panel whipping, snagging, and abrading against the structure or cable framework is much more harmful in the long run than simple exposure to sunlight. Knit shade material should be installed hung underneath, not pulled across the top of cable or framework, to avoid abrasion and snagging damage. Chemical, fire, heat, abrasion, and snagging damage are not covered under manufacturer warranty. Shade panel warranty inspection returns must be authorized in advance and returned freight prepaid to designated location for visual inspection. TheNaturalHome.com will only pay the cost to ship warranty repaired or replaced merchandise back to client after inspection confirms damage was a material or workmanship defect. The following are trade-standard, non-valid reasons for requesting warranty inspection: First, there is no up-down, right-left, top-bottom or front-back reference point for any panel. Panel 'Width and Length' are measured from outside-edge to outside-edge of the sewn perimeter hem at the four corners only. Knit material has inherent tension and flex in the looming process that will resolve aesthetic issues when installed taut with rope lacing. Grommets on one side of panel are unlikely to line up with grommets on the opposite side or from one grommeted pinch pleat to the next. Exact one foot on-center grommet spacing, specific grommeted pinch pleat centering, and special placement on a particular side for grommets is not warranted. Any panel over 12 foot wide may have a noticeable factory knitted loom splice seam without notice in advance since the 20, 26, and 32 foot wide stock roll width fabrics are manufactured on side-by-side looms. We traditionally cover this seam with a grommeted pinch pleat, but it is possible to order plain cloth without a center GPP, per automated quoting form. Aesthetic issues are not warranted. For instance, the White 50% color knitted shade material can sometimes arrive with patches of orange discoloration and spotting as a result of the manufacturing process. This discoloration will dissipate after installation in the sunlight. Shade material may always be slightly wrinkled from rolling onto storage tube or shipping and knit appearance can vary from sample swatches presented and may also vary between various stock widths. Minor aesthetic flaws in knit appearance, stitching, and snags are not a structural panel failure problem and not warranted. Shade material is lockstitch knitted to prevent structural unraveling. Longevity is the same regardless of aesthetic appearance flaws in the fabric knit or perimeter webbing. If need be, one can use needle and thread to pull small flaws together and super-glue sealed. It is not considered a warranty-related defect unless it affects panel performance. Special fire resistant certified shade materials are not available. The finish 'Length' ordered is what we produce by cutting enough fabric to fold hem and GPP. The only time to anticipate deviation in finish dimension purchased is when 'Width' is a stock material width of 6, 8, 10, 12, 20, 26 and 32 foot. Then, finish 'Width' is likely going to be two to three inches less after folding and sewing perimeter hem and any length-wise grommeted pinch pleats. ALL other times, the size panel you request is the finish size we do our very best to produce. Knitted shade netting is inherently difficult to work with due to tension releasing when cut to custom sizes, so trade-standard warranty for free replacement is a four inch tolerance. As measured at four corners, any error of five inches, or more, is warranted for free remake, replacement, or refund at our sole discretion. This accuracy guarantee does not apply to shapes other than rectangles or any panel dimension over 32 foot. Errors of less than five inches are considered for remedy on a case-by-case basis only when the panel has not been installed and can be resold as a new-unused remnant. Special grommet placement requests are not warranted and grommet spacing at exactly one foot on center is not warranted. Click here for knit shade material engineering specifications and product MSDS sheet.

Warranty and Warnings

Merchandise purchased from TheNaturalHome.com is covered only under that product's manufacturer warranty. Client is solely responsible for presenting all claims under those warranties directly to the warrantor. TheNaturalHome.com makes no consultation, service work, or system design warranties, whether express or implied and shall not in any way be held responsible for any customer misuse of Our products or misunderstanding of any and all of Our designs, whether express or implied. All responsibility and liability for any and all damages caused by viruses contained within the electronic files of this site are disclaimed. All information contained within this site and supplied by any and all TheNaturalHome.com consultations, design work and service work is governed by the following information disclaimer. Be aware that septic tank effluent, composting toilet materials, and greywater alike contain bodily fluids and as such are regulated as Hazardous Materials by the Federal government. Such hazardous materials (raw sewage) should be handled only by licensed professionals trained in the proper safety procedures and using proper safety equipment. If you are unsure of the correct handling and safety procedures, please check with your local health department for more detailed information.

Installation and Liability

Merchandise purchased from or through TheNaturalHome.com must be installed by a licensed professional installer and in accordance with manufacturer's specifications and local/state/federal electrical, plumbing, health and building department regulations. Building department regulation requirements differ from one town to the next and it is the Client's sole responsibility to ensure compliance. This is particularly important with hard-wired electric kitchen appliances and hoods, gas refrigerators, septic systems, greywater projects, and composting toilets. Even shade panel installations can come under local regulatory scrutiny (pull permits) in some parts of the United States. Client understands that shade panels are not rated for any fire resistance and hereby confirms that no fire resistance has been expressed or implied by Seller for Merchandise. Client is solely responsible for purchasing (pulling), and coordinating all of the inspections for all of the necessary electrical, plumbing, grading, road, health and building permits for their project. Some of these services, as requested, can be provided to Our Summit County, Colorado Clients where TheNaturalHome.com is a licensed and insured general Contractor (license number 6) and septic system installer (license number 69). TheNaturalHome.com is not an architectural nor an engineering firm. We do Our best to consult on your project, but site specific engineering, load calculations, soil viability testing, and/or custom blueprinting are not included in any consultation service or system package We sell.

Art and Data Release

Client does hereby irrevocably consent to and authorize the anonymous use and reproduction by Us, or anyone authorized by Us, of any and all artwork, digital images, or stories submitted via email, phone or fax. Our primary concern is protection of your privacy. We never release Client information to anyone for any reason, so any use would be purely anonymous. We will not pay a fee or provide compensation of any sort, now or hereafter, for information, solicited or otherwise, that We share. Client hereby agrees to allow reproductions to be presented online or in printed format and hereby gives Us unrestricted right and permission to copyright and use, re-use, publish, and republish artwork, stories or digital images submitted without restriction as to changes or reproduction hereof in color or otherwise, made through any and all media now or hereafter known for illustration, art, promotion, advertising, trade, or any other purpose whatsoever. This agreement shall be binding upon Client and their heirs, legal representatives and assigns.

Information Disclaimer

The information from or through this site and from or through Architerra Enterprises, Inc. (d.b.a. The Natural Home Building source and TheNaturalHome.com is provided 'as-is', 'as available', and any and all warranties, express or implied, are disclaimed (including but not limited to the disclaimer of any implied warranties of merchantability and fitness for a particular purpose). We are not an engineering or architectural design firm. We are not licensed electricians or plumbers. We do not accept any legal liability whatsoever for any 'errors and omissions' perceived or otherwise. Any and all consultation given, or website information provided, may contain typos, errors, omissions, problems, or other limitations. Merchandise specifications are subject to change at any time by manufacturer without any advance notice from Our company or the manufacturer. Product specifications and installation instructions are likewise subject to possible error and may change at any time without Our knowledge. Blueprints, sketches, and any written consultation are provided for informational educational purposes only and not intended for construction-ready application without approval first by locally licensed structural engineer and local building department regulations. Our sole and entire maximum liability for any inaccurate information, for any reason, and user's sole and exclusive remedy for any cause whatsoever, shall be limited to the amount paid by the customer for the information received (if any cost was involved). We are not liable for any indirect, special, incidental, or consequential damages including but not limited to damages for loss of business, loss of profits, litigation, or the like, whether based on breach of contract, breach of warranty, tort (including negligence), product liability or otherwise, even if advised of the possibility of such damage. The limitations of damages set forth above are fundamental elements of this website, communications, and information provided without such limitations. No representations, warranties or guarantees whatsoever are made as to the accuracy, adequacy, integrity, reliability, currentness, completeness, suitability or applicability of the information to a particular situation. Complaints by Client to any rating agency, company review, or personal referral concerning Merchant or Merchandise in direct disregard of this terms of service agreement are to be considered libel and will be prosecuted as such, if need be.

Consultation and Service

Written and verbal consultation on the specifics of any project is governed by this terms of service agreement, with or without purchase of Merchandise. Technical assistance is different with us because Our staff members live with what We sell. Housing, septic, composting and greywater systems all include free on-going consultation, so We'll take the time to answer your questions and ensure your project is a success. At the very least, We strive to save you money by avoiding costly mistakes, both short and long term. If We don't have an answer to your question right on the spot, We'll take the time to research it further and get back to you. We can consult on the phone, if you wish, but email allows us to much more completely answer your questions with sketches and links to related articles. Keeping everything in writing is a sure way to avoid any confusion with "you said he said" situations later. Our sustainable housing products are low-tech in nature, but their design is typically complicated by the seemingly endless installation variables for unique locations and applications. Any and all consultation (blueprints, photos, written word and sketches) purchased from TheNaturalHome.com are the intellectual, copyrighted property of TheNaturalHome.com. HTM house plans, septic system packages and greywater kit components Were designed and priced for the typical home and based upon the average soil type. Whether or not your local building department requires stamped engineer approval, you are well advised to take sample blueprints, sketch plans, and system consultation suggestions to a local professional engineer (PE). Local PEs are familiar with your soil type and more aware of unique building codes and concerns in your area. Most importantly, a local PE is readily available for the necessary site visits. your PE is then responsible for preparing a folder of notes and details which confirm the structural integrity, viability and liability for your project. TheNaturalHome.com is not an architectural design nor an engineering firm. We do Our best to consult on your project, but site specific engineering, load calculations, soil viability testing and/or custom blueprinting are not included in any consultation service or system package We sell. Communication is intended only for the paid Client recipient(s) and may be confidential and/or legally privileged and must be treated as such in accordance with state and federal laws. Any disclosure, copying, distribution or action taken in reliance on the content is strictly prohibited.

Fiberglass Water Tubes

Water Tube and Cap ("Item") is manufactured for Client on special order basis by an independent company ("Manufacturer"). Manufacturer's warranty and guarantee, and special terms and conditions of sale and delivery apply to this Item. No warranty or guarantee is provided, expressed, or implied by Merchant, TheNaturalHome.com. Merchant and Manufacturer do not assume any liability or responsibility for damage in transit. Only the transportation company is responsible for damage in transit. Before signing and receiving Item from transportation company, Client should demand to see packing list from Item shipment. If shipment is short Item (for instance: three caps, not four) or damaged (any Item defects), refuse the goods until the transportation agent notes the shortage or damage in writing on the freight receipt waybill. Always require a copy of the annotated waybill with shortage or damage noted in writing and signed/initialed by driver.Watch for hidden damage and inspect all Items fully before signing and accepting the shipment from a freight carrier. Client signature is testament that Item arrived in the proper amount and in undamaged condition. Hidden damage or shortage (anything found after delivery) is Client's sole responsibility to file claim with transportation company. Merchant and Manufacturer do not assume any responsibility or liability for Item damage during/after installation. Manufacturer guarantees Item is up to its established standard of manufacture as to material and workmanship. In all claims, liability is limited to replacement of the invoice value of any Item claimed to be defective. Client assumes all risk and liability whatsoever resulting from the use of such Item, whether used singly or in combination with other substances. The materials purchased hereunder (Item) shall be examined and tested upon receipt thereof, and before the materials are used and within thirty days from such receipt, Client shall notify Merchant in writing of any claims on account of quality thereof. Failure to so notify Merchant shall constitute a waiver of all claims with respect to Item, and in any event the use of Item by Client shall be deemed to mean satisfactory performance on the Item and Merchant. No claim of any kind (whether as to Item delivered or for non-delivery of Item) shall be greater in amount than the purchase price of Item covered hereby with respect to which any damages are claimed. Merchant and Manufacturer will accept no returns unless previously authorized in writing with Return Merchandise Agreement. Item returned without RMA written permission is liable to non-acceptance and return at expense of Client. RMA will specify 25% restocking fee on Item, plus deduction for original cost of crating and shipping, plus Client is responsible for all return shipping arrangements and all related expenses. There are no promises, agreements, or understandings between Client and Merchant and Manufacturer not contained in this document. Should you use your own form to make a purchase based on a price quote from Merchant, the conditions contained herein shall be deemed to be incorporated in said order or contract or invoice.